Mitsubishi MOTION CONTROLLERS Q172DCPU Especificações descarregar pdf (Página 61)

Additional procedures Project creation

Motion controller Q170MCPU/ Q172DCPU/ Q173DCPU 5 - 11

5.2 Additional procedures

5.2.1 Transfer setup

This section explains how to set the communication between PC and Q170MCPU/Q172DCPU by the

Transfer Setup screen.

For the sake of simplicity, it will be explained how to configure the communication by using a direct

connection with an USB cable.

Operating Procedure (Motion CPU access)

 Double-click on Serial/USB button in the "PC side I/F" selection.

 Select USB and close the pop-up window.

 Select PLC module in the "CPU side I/F".

 Select No specification in the "Other Station" setting.

 Select PLC No.2 as "Target System".

Operating Procedure (PLC CPU access)

 Double-click on Serial/USB button in the "PC side I/F" selection.

 Select USB and close the pop-up window.

 Select PLC module in the "CPU side I/F".

 Select No specification in the "Other Station" setting.

 Select PLC No.1 as "Target System".

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 87 88

Sem comentários

Mitsubishi MOTION CONTROLLERS Q172DCPU Especificações Página 61