Mitsubishi HC9000D Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Projetores Mitsubishi HC9000D. HC9000D - Mitsubishi Electric Australia Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 5
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
1
Home Theater Projector
MODEL
HC9000D/HC9000DW
Controlling the projector using a personal computer
This projector can be controlled by connecting a personal computer with RS-232C terminal.
PC-controllable functions:
Turning the power ON or OFF
Changing input signals
Inputting commands by pressing the buttons on the control panel and remote control
Menu setting
Connection
Terminal panal
SERIAL terminal
RS-232C cable
SERIAL
D-SUB 9-pin D-SUB 9-pin
Terminal panal
To RS-232C
terminal
Important:
Make sure that your computer and projector are turned off before connection.
Boot up the computer first, and then plug the power cord of the projector.
(If you do not follow this instruction, the Com port may not function.)
Adapters may be necessary depending on the PC connected to this projector. Contact your dealer for details.
1) Interface
PROTOCOL RS-232C
BAUD RATE 19200 [bps]
DATA LENGTH 8 [bits]
PARITY BIT NONE
STOP BIT 1 [bit]
FLOW CONTROL NONE
This projector uses RXD, TXD and GND lines for RS-232C control.
For RS-232C cable, the reverse type cable should be used.
Vista de página 0
1 2 3 4 5

Resumo do Conteúdo

Página 1 - HC9000D/HC9000DW

1Home Theater ProjectorMODELHC9000D/HC9000DWControlling the projector using a personal computerThis projector can be controlled by connecting a person

Página 2 - 4) Operation commands

22) Control command diagramThe command consists of the header, action, function code, data code, and end code. The length of the com-mand varie

Página 3

35) Remote commands (Not executable in stand-by mode other than power on and off.)Some remote control operations can be achieved by the remote command

Página 4 - 6) Reading command diagram

46) Reading command diagramThe projectors operating status, such as POWER-ON/OFF and the currently selected input terminal, etc. can be monitored.Acti

Página 5 - How to set the value

57) Menu setting commands (Not executable in stand-by mode.)The menu setting commands are used for the menu setting of this projector. If the personal

Comentários a estes Manuais

Sem comentários